20
SQT0852
For NFC-compatible Bluetooth
®
devices
(Android
TM
devices) only
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
®
device
on the main unit, you can complete all
preparations, from registering a Bluetooth
®
device to establishing a connection.
Preparation
≥
Turn on the NFC feature of the device.
≥
Android device version lower than 4.1
requires the installation of the app “Panasonic
Music Streaming” (free of charge).
1
Enter “Panasonic Music Streaming” in the search
box of Google Play
TM
to search, and then select
“Panasonic Music Streaming”.
2
Start the app “Panasonic Music Streaming” on the
device.
– Follow on-screen instructions on your device.
– Always use the latest version of the app.
1 Press [
-PAIRING] to select
“BLUETOOTH”.
2 Touch and hold your device on the
NFC touch area of the main unit [ ].
(
>
6)
Do not move the Bluetooth
®
device until it beeps,
displays a message or reacts in some way.
Once the Bluetooth
®
device has reacted, move the
device away from the main unit.
≥
When the registration and connection of the
Bluetooth
®
device is complete, the name of the
connected device is indicated on the display for a
few seconds.
≥
The location of the NFC touch area differs
depending on the device. When a connection
cannot be established even if your Bluetooth
®
device has touched the NFC touch area of the main
unit, change the position of the device or main unit.
The condition may also improve if you download the
dedicated app “Panasonic Music Streaming” and
start it up.
3 Start playback on the Bluetooth
®
device.
≥
If you touch another device to the main unit, you can
update the Bluetooth
®
connection. The previously
connected device will be disconnected automatically.
≥
When the connection is established, playback may start
automatically depending on the type of device being
used.
≥
The One-Touch Connection may not work properly
depending on the type of device being used.
Remote control code
When other Panasonic devices respond to this
system’s remote control, change the remote
control code on this system and the remote
control.
Preparation
≥
Turn off all other Panasonic products.
≥
Turn on the main unit.
≥
Aim the remote control at this unit’s remote
control sensor.
∫
To set the code to “REMOTE 2”
While pressing and holding [MUTE], press and
hold [OK] for 4 or more seconds.
“REMOTE 2” is indicated on the display.
∫
To set the code to “REMOTE 1”
While pressing and holding [MUTE], press and
hold [
4
] for 4 or more seconds.
“REMOTE 1” is indicated on the display.
One-Touch Connection
(Connecting by NFC)
SC-HTB690-SQT0852.book 20 ページ ２０１５年１月３０日 金曜日 午後２時２分
Summary of Contents for viera SC-HTB690
Page 38: ...38 SQT0852 ...
Page 39: ...SQT0852 39 ...
