Panasonic VDR-M70EG Page 33 Service Manual Download

Page: 33 / 169

Message

Cause/condition for

message to appear

Troubleshooting

Cannot replace thumbnail

on PHOTO scenes.

Cannot select any more

scenes

CARD ALMOST FULL

Card error has occurred.

Format the card now?

Card error has occurred.

Formatting is not complete.

Card error has occurred.

Keep card inside & restart.

Card error.

Card full.

Cannot execute.

Card is not formatted.

Format the card now.

YES

Appears when a photo thumbnail was

selected for change in scene editing

menu: The specifications stipulate that

the thumbnail of photo cannot be

changed.

Appears when the number of scenes

selected on card has exceeded the upper

limit of 999 scenes.

Appears when the remaining recordable

number of photos is less than 10 during

recording.

Appears when a card initialized on PC,

etc., or a card whose initialization was

interrupted before, is loaded.

Appears when a damaged card is

initialized.

Appears when no photo could be recorded

on card normally.

Appears when the card cannot be

recognized because its terminals are

dirty.

Also appears when data other than

photos is recorded on card.

Appears when the recording capacity of

card has reached the limit during

recording.

Appears when a card whose remaining

recording capacity is small, and on which

no photo can be recorded, is loaded.

Appears when the remaining capacity of

card has reached the recordable limit.

Appears when an unformatted card or a

card formatted on PC was loaded.

Select a video to change the

thumbnail.

Release the selection of unnecessary

scenes.

Prepare another card, or delete

unnecessary photos.

Choose “YES” and designate it to

initialize the card (deleting all

recorded data).

Replace the card.

Set the power switch to “POWER

OFF”, and after several seconds, set

it to “[CARD]PHOTO”.

Initialize the card (deleting all

recorded data).

Use a dry cloth to clean the card

terminals.

Replace the card.

Replace the card, or delete

unnecessary photos

Replace the card, or delete

unnecessary photos.

Replace the card, or delete

unnecessary photos.

Choose “YES” and designate it when

formatting card (deleting all recorded

data).

VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC

Downloaded From CamcorderManual.com Panasonic Manuals

Summary of Contents for VDR-M70EG










































































































































































Search results

Summary of Contents for VDR-M70EG

Reviews:

Related manuals for VDR-M70EG

Brands by name

Popular brands

Panasonic VDR-M70EG, Service Manual

Search results

Summary of Contents for VDR-M70EG

Reviews:

Related manuals for VDR-M70EG

Brands by name

Popular brands