4 - 15
Troubleshooting > Messages and Troubleshooting
Message
Cause/condition for
message to appear
Troubleshooting
Error occurred.
Please replace disc of format
disc
Error occurred.
Please replace disc.
ERROR ××××
Finalize may not be
complete.
Finalize again now?
YES NO
Found error in image file.
Repair disc now?
YES NO
In DVD-R Disc, Video mode
of the disc recorded once
cannot be changed.
It is unrecordable on this
card.
Appears if repair has failed with DVD-R
disc after message “Data error in all
image file. Repair all data now?” or
“Found error in image file. Repair data
now?” appeared.
Appears if repair has failed with DVD-R
disc after message “Data error in all
image file. Repair all data now?” or
“Found error in image file. Repair data
now?” appeared.
Appears if the self-diagnosis function in
VDR-M30 detects a serious problem
during recording, or when the same
trouble occurs three times consecutively
during recording. (4-digit alpha-
numerals showing the code of trouble
will appear in ××××.)
Appears if accident, such as power off,
occurred during finalizing, and then
power was turned on again or disc was
reloaded.
Appears if repair has failed after
message “Data error in a part of image
file. Repair disc now?” appeared.
Appears if an attempt is made to change
the Video recording mode of a recorded
DVD-R disc. Once even one scene is
recorded on a DVD-R disc which has
been initialized, the originally
designated Video recording mode is
specified to be maintained until the final
recording on the disc.
Also appears after the DVD-R disc has
been initialized.
Appears when a card other than SD
memory card or MultiMediaCard was
loaded.
Initialize the disc (deleting all
recorded data), or replace the disc.
Replace the disc.
Take note of the 4-digit alpha-
numerals in ××××, and refer to “4-5
Self-Diagnosis Function and
Troubelshooting”.
Choose “YES” and designate it to
finalize the disc.
Choose “YES” and designate total
repair (automatic repair) of video file.
Choosing “NO” will display a
message for verifying initialization.
[Refer to *3 on page 4-12]
Stop trying to change the Video
recording mode, or replace the disc.
Operate VDR-M30 after the message
disappears.
Insert an SD memory card or
MultiMediaCard.
