Troubleshooting
Othe
rs
154
LSQT1025
With a computer
Problem
Check points
“PUSH THE RESET
SWITCH.” is displayed.
≥
The unit has automatically detected an error. Press the
RESET button with the projecting part of the grip belt
A
.
This will restart the unit.
≥
If you do not press the RESET button, the power to this
unit is turned off automatically about 1 minute later.
≥
Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and consult the dealer who you
purchased this unit from. Do not attempt to repair the
appliance by yourself.
Problem
Check points
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
≥
Have you set this unit to the correct mode?
#
The unit is not recognized if it is set to a recording mode. Set
it to a playback mode. If it is set to card playback mode,
disconnect the USB cable, set [USB FUNCTION] to
[PC CONNECT] and then reconnect the USB cable.
≥
Select another USB terminal on the computer.
≥
Check the operating environment. (
l
121)
≥
Turn on the power to this unit.
When
DVD-MovieAlbumSE is
started, the [Mount
Information] dialogue
box appears.
≥
You inserted an incompatible disc.
#
A disc other than a DVD-RAM or a DVD-RW (VR format) is
loaded in the drive: DVD-MovieAlbumSE cannot be used for
media other than DVD-RAM or DVD-RW (VR format).
≥
If there are multiple drives, a drive other than this unit may
be selected.
#
Click the [Preference] button in the dialogue box, click the
[Device setting] tab to choose the drive where the disc is
loaded in the [Drive Select] column, and then click [OK].
≥
If an error message appears even after a compatible disc is
inserted, packet writing software may be installed in your
computer. Uninstall the packet writing software.
A
LSQT1025(ENG).book 154 ページ ２００６年２月４日 土曜日 午後６時１０分
