Installation
126
LSQT1025
Wit
h
a
co
mp
u
ter
5 Read carefully through the End User License
Agreement (
l
124), then click [Yes].
≥
You cannot install the application if you click [No].
6 Click [Next].
Continue to follow the on-screen messages to install it.
7
When installation is complete, some notes will appear:
Check the contents, then click [
k
] at the top right of
window.
8 Click [Finish].
Windows 2000 only:
The detection of device will start, after which it will take several minutes
for the computer to detect the device. When detecting the device is
complete, a message that prompts you to reboot will appear:
Click [Yes].
∫
If any trouble has occurred while installing DVD-RAM Driver:
When the [Block] is selected in the [Driver Signing Options] in the [System Properties], the
installation procedure will not complete. Select [Warn] and try again.
To check and change the setting, select [start]
#
([Settings]
#
) [Control Panel]
#
([Performance
and Maintenance]
#
) [System] and select [Driver Signing] of the [Hardware] tab.
∫
About the [RAMASST] support tool:
[RAMASST] is a support tool for Windows XP that disables the drive’s CD writing function so that
data can be written from a computer to a DVD-RAM.
When you install the DVD-RAM Driver, [RAMASST] is automatically installed and displayed in
[Startup].
The computer must be rebooted for the driver to work.
LSQT1025(ENG).book 126 ページ ２００６年２月４日 土曜日 午後６時１０分
