Troubleshooting
Othe
rs
152
LSQT1025
Problem
Check points
Recording starts but
stops immediately.
The playback picture
breaks up for a moment.
≥
Is the disc scratched or dirty?
#
Clean the disc. (
l
24)
≥
The unit is hot. Follow the messages on the display.
To use the unit again, turn the unit off and leave it for a
while.
The unit arbitrarily stops
recording.
≥
Is the AGS function activated?
#
Record in the normal horizontal position or set [AGS] to
[OFF]. (
l
51)
Recorded still pictures
are not clear.
≥
Are you trying to record small or finely detailed objects
with [PICT. QUALITY] set at [
]?
#
If you try to record small or finely detailed objects with
[PICT. QUALITY] set at [
], the images may break up into
a mosaic-like pattern. Record with [PICT. QUALITY] set at
[
] instead. (
l
59)
Auto focus function does
not work.
≥
Is manual focus mode selected?
#
Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥
Are you trying to record a scene which is hard to bring into
focus in auto focus mode?
#
There are some recording subjects and surroundings for
which the auto focus does not operate correctly. (
l
162) If
so, use the manual focus mode to adjust the focus. (
l
77)
≥
Is the night view function set?
#
When the night view function is working, focusing shifts into
the manual mode.
Sound is not played back
from the built-in speaker
of this unit.
≥
Is the volume too low?
#
During playback, move the volume lever to display the
volume indication and adjust it. (
l
83)
Although this unit is
correctly connected to a
TV, playback images
cannot be seen.
The playback images are
squeezed horizontally.
≥
Have you selected video input on the TV?
#
Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
≥
Is the [TV ASPECT] setting correct?
#
Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP]
#
[TV ASPECT]
#
[16:9]
or
[4:3] and press the joystick.
LSQT1025(ENG).book 152 ページ ２００６年２月４日 土曜日 午後６時１０分
