Panasonic VB-42440 User Manual Download Page 5

Page: 5 / 50

Precautions

Warning

: Products powered by electricity

should be serviced only by experienced

professional technicians. Any attempt by others

to service the products dealt with in this manual
could result in serious injury or death.

Warning

: The 900 MHz cordless telephone and

associated equipment described in this manual
are not waterproof. To reduce the risk of fire,

electrical shock, or damage to equipment, DO

NOT expose the equipment to rain or moisture.

Caution:

This equipment contains a Rechargeable

Nickel-Cadmium Battery

• Do not short-circuit the battery.
• Do not charge the battery in any charger other

than the one specified in this Guide. Using
another charger may damage the battery, or
cause the battery to explode.

• Do not remove or damage the battery casing.
• Never throw the battery into a fire, disassemble

it, or heat it.

The nickel cadmium battery you have

purchased is recyclable. At the end of its
useful life, under various state and local

laws, it is illegal to dispose of this battery

into your municipal waste stream.

900 MHz UG.book Page v Wednesday, June 13, 2001 12:42 PM

Summary of Contents for VB-42440



















































Search results

Summary of Contents for VB-42440

Reviews:

Related manuals for VB-42440

Brands by name

Popular brands

Panasonic VB-42440, User Manual

Search results

Summary of Contents for VB-42440

Reviews:

Related manuals for VB-42440

Brands by name

Popular brands