Installing the 900 MHz Cordless Telephone
900 MHz Cordless Telephone User Guide
17
Direct Wall Mounting
If you do not have a standard wall plate, you can
mount the 900 MHz Cordless Telephone base
station directly on a wall. Before doing so, consider
the following:
•
Select a location away from electrical cables,
pipes, or other items behind the mounting
location that could cause a hazard when screws
are inserted into the wall.
•
Ensure that the wall material is capable of
supporting the weight of the base station.
•
Use #10 screws with anchoring devices suitable
for the wall material at the mounting point.
1.
Insert two mounting screws in the
wall, 3-15/16
inches apart. Allow
about
3/16 of an inch between the
wall and screw heads for mounting
the base station.
2.
Perform steps
1
to
3
of
"Standard
Wall Plate Mounting" on page
15
.
3.
Plug a telephone cord into the
LINE IN
jack on the base station.
Connect the other end to the wall
jack leading to the Panasonic PBX.
4.
Plug a telephone cord from a Panasonic key
telephone into the
LINE OUT
jack on the base
station.
900 MHz UG.book Page 17 Wednesday, June 13, 2001 12:42 PM
Summary of Contents for VB-42440
