Panasonic VariCam AJ-HPX3700G Operating Instructions Manual Download Page 141

Page: 141 / 212

141

Manipulating Clips with Thumbnails: Formatting SD memory cards

ula

tin

g C

lip

s w

ith

ails

SD memory cards can also be formatted from the thumbnail
screen. With an SD memory card inserted into the unit,
perform the following operation:

Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.

Press the THUMBNAIL MENU button and select
OPERATION

FORMAT from the thumbnail menu.

The following screen appears. Select “SD CARD”, then
press the SET button.
Select “EXIT” if formatting is not required.

The following screen appears. Use the cursor buttons
and the SET button to select YES.

The SD memory card is formatted.

Note

SD memory cards can also be formatted from the menu
screen. For more information, see [Handling SD memory
cards] (page 92).

Formatting SD memory cards

!"#$%&'())*#+,-.+/012345677899.O.9:;<99=>>?@A>BACDEFGDEHIJKL?M

Summary of Contents for VariCam AJ-HPX3700G





















































































































































































































Search results

Summary of Contents for VariCam AJ-HPX3700G

Reviews:

Panasonic VariCam AJ-HPX3700G, Operating Instructions Manual, Page: 141 / 212

Search results

Summary of Contents for VariCam AJ-HPX3700G

Reviews: