120
Preparation: Preparing for Audio Input
Take the following steps to prepare the camera for connecting audio input devices.
The unit can be equipped with the AJ-MC900G stereo
microphone kit (optional).
1
Open the microphone holder.
2
Mount the microphone and tighten the clamping screw.
The microphone must be attached with the UP mark on
the microphone facing up.
a.
Clamping screw
3
Connect the microphone cable to the MIC IN jack on the
camera.
b.
MIC IN jack
4
Set the AUDIO IN switch to [FRONT] depending on the
audio channel to be recorded.
c.
AUDIO IN switch
1
Remove the cover to insert the wireless receiver and
secure it with the screws.
2
Set the AUDIO IN switch to [W.L.] depending on the
audio channel to be recorded.
3
When using a 2-channel wireless receiver, select
“DUAL” in the WIRELESS TYPE menu option. The
menu option WIRELESS TYPE can be found in the
<MIC/AUDIO2> screen on the MAIN OPERATION
page.
Preparing for Audio Input
When Using the Front Microphone
a
b
c
When Using a Wireless Receiver
When Using the Unislot Wireless Receiver
!"#$%&'())*#+,-.+/012345677899.N)9:;<99=>>?@A>BACDEFGDEHIJKL?M