Panasonic VariCam AJ-HPX3700G Operating Instructions Manual Download Page 138

Page: 138 / 212

138

Manipulating Clips with Thumbnails: Setting of Clip Meta Data

The unit allows you to check details of metadata read from
SD memory cards.

Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.

Press the THUMBNAIL MENU button to select META
DATA

PROPERTY from the thumbnail menu. Then,

the screen like this is displayed:

Use the cursor buttons to move the pointer to the item
you wish to check, then press the SET button.

While viewing the settings for the metadata, use the
cursor buttons to move the pointer to the desired option.
Then, press the SET button. A soft keyboard screen is
displayed, allowing you to modify the setting.

Set “ON”/“OFF” in META DATA

RECORD from the

thumbnail menu. The factory setting is “OFF”.

Checking and modifying read metadata

To set whether or not the uploaded metadata is
recorded

!"#$%&'())*#+,-.+/012345677899.'09:;<99=>>?@A>BACDEFGDEHIJKL?M

Summary of Contents for VariCam AJ-HPX3700G





















































































































































































































Search results

Summary of Contents for VariCam AJ-HPX3700G

Reviews:

Panasonic VariCam AJ-HPX3700G, Operating Instructions Manual, Page: 138 / 212

Search results

Summary of Contents for VariCam AJ-HPX3700G

Reviews: