Panasonic UF-7200 Operating Instructions Manual Download | Manualshive

Page: 6 / 62

background image

6

Safety Information

When the machine is not used over an
extended period of time, unplug it. If an
unused machine is left connected to a
power source for a long period, degraded
insulation can cause electric shocks,
current leakage or fire.

Be sure to unplug the machine before
accessing the interior of the machine for
cleaning, maintenance or fault clearance.
Access to a live machine's interior can
cause electric shock.

Once a month, unplug the machine and
check the power cord for the following. If
you notice any unusual condition, contact
your authorized Panasonic dealer.

z

The power cord is plugged firmly into

the receptacle.

z

The plug is not excessively heated,

rusted, or bent.

z

The plug and receptacle are free of

dust.

z

The cord is not cracked or frayed.

Operating Safeguards

Do not touch areas where these caution
labels are attached to the surface may be
very hot, and cause severe burns.

Do not place any liquid container such as
a vase or coffee cup on the machine. Spilt
water can cause fire or shock hazard.

Do not place any metal parts such as
staples or clips on the machine. If metal
and flammable parts get into the machine,
they can short-circuit internal
components, and cause fire or electric
shocks.

If debris (metal or liquid) gets into the
machine, unplug the machine. Contact
your authorized Panasonic dealer.
Operating a debris contaminated machine
can cause fire or electric shock.

Never open or remove machine covers
that are secured with screws unless
specifically instructed in the "Operating
Instructions". A high-voltage component
can cause electric shocks.

Do not try to alter the machine
configuration or modify any parts. An
unauthorized modification can cause
smoke or fire.

Consumable Safeguards

Never dispose of toner or a toner
cartridge into an open flame. It can cause
an explosion, burns, and/or injuries.

Keep SD Memory Card/verification stamp
out of the reach of children. If an SD
Memory Card/stamp is swallowed
accidentally, get medical treatment
immediately.

«
...
4
5
6
7
8
...
»

Summary of Contents for UF-7200































































Reviews:

No comments

Related manuals for UF-7200

swingo 755B power

Brand: Taski Pages: 12

Speed Scrub 2601

Brand: Nobles Pages: 75

Brand: Racing Pages: 22

Brand: Stihl Pages: 188

AMS-210EN-HL1306

Brand: JUKI Pages: 12

Brand: Baby Lock Pages: 28

Brand: JUKI Pages: 24

Brand: Hitachi Pages: 48

Brand: JUKI Pages: 32

Brand: Brother Pages: 8

Brand: JUKI Pages: 39

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 41

KX FP205 - B/W Thermal Transfer

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 64

KX FP145 - Slim-Design Fax Machine

Brand: Panasonic Pages: 86

Brand: Panasonic Pages: 110

Brand: Panasonic Pages: 216

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands