Scanning
21
Us
in
g
6
Press the Start/Stop Key.
•
The unit starts scanning and the image is
printed.
•
The copying status is shown on the display.
•
After printing is finished, the Screen Erase
Announce will be shown on the display.
7
After erasing the written text/diagrams on the
screen, press the Mode Key (
) to return to
standby mode.
Note
•
Only remove the USB cable once you have
returned to standby mode.
•
For information regarding how to set ink
cartridges or paper in your printer, please
refer to the manual of the printer.
■
System Requirements
*1
This unit does not function with Hi-Speed USB 2.0. Even if
using a computer equipped with Hi-Speed USB 2.0, this unit
functions with Full Speed USB 2.0.
(This unit will not run at the rated speed of Hi-Speed
USB 2.0.)
*2
Microsoft
®
Windows
®
2000 operating system (hereafter
Windows 2000)
*3
Microsoft
®
Windows
®
XP operating system
(hereafter Windows XP)
*4
Microsoft
®
Windows Vista
®
operating system
(hereafter Windows Vista)
■
Scanning to a computer
1
Set the power switch to on (
I
).
2
Connect the computer to “USB Connector-B for
Computer” with a USB cable (included).
•
The computer icon is shown on the display.
The display below is an example of the unit in
standby mode.
•
The computer recognizes the electronic board
as a Removable Disk and the drive is
displayed in the Windows Explorer window.
Scanning to a computer
Computer
IBM
®
PC/AT
®
or compatible machine
Interface
USB 2.0 or USB 1.1*
1
OS
Windows
®
2000*
2
(Service Pack 4 or later)
Windows
®
XP*
3
(Service Pack 2 or later)
Windows Vista
®
*
4
Computer
UB5838C-PJQXC0259ZA_mst.book 21 ページ ２００９年５月２６日 火曜日 午後２時５９分
