Panasonic TY-TP50P10S - Touch-screen - Wired, Operating Instructions Manual

Page: 44 / 48

44
Model Number TY-TP42P10S TY-TP50P10S TY-TP58P10S TY-TP65P10S
Type Touch Panel
Power
source
Voltage +5V DC±10%
Electric
current
Max. 450 mA
Supply
system
From USB bus
Touch panel
Detection
system
Infrared retrore fl ective detection
Panel
window
938 mm (W) × 535 mm (H) 1,128 mm (W) × 648 mm (H) 1,305 mm (W) ×747.5 mm (H) 1,449 mm (W) × 819 mm (H)
Detection
range
920 mm (W) × 518 mm (H) 1,106 mm (W) × 622 mm (H) 1,287 mm (W) ×723.5 mm (H) 1,434 mm (W) × 807 mm (H)
Effective
detection
range
Same as above Same as above Same as above Same as above
Resolution Approx. 32,000 x 18,000 points *
1
Output
system
Coordinate output
Optic
element
pitch
Infrared LED x 4, CMOS image sensor x 2
Minimum
detection
size
7 mm 8 mm 9 mm 10 mm
Response
rate
100 points / sec
Interface
USB 2.0 full speed device
Signals: +DATA, -DATA, VCC, GND
Connector: Type B
Temperature When operating: 0 ~ 40 ˚ C *
2
Humidity When operating: 20 ~ 80% (No dewing) * 2
Resistance to
external light
Lateral light 2,000 lx + 20% (20 ˚ angle of incidence)
Frontal light 10,000 lx + 20% (90 ˚ angle of incidence)
External
dimensions 1,016.4 mm (W) ×
686 mm (H) × 47.9 mm (D) 1,206.4 mm(W) ×
798.6 mm (H) × 47.9 mm (D) 1,395.4 mm (W) ×
923.1 mm (H) × 47.9 mm (D) 1,550.8 mm(W) ×
1,008.2 mm (H) × 47.9 mm (D)
Mass Approx. 4.1 k g Approx. 4.6 k g Approx. 5.8 k g Approx. 6.7 k g
Escutcheon
material
Aluminum
*1 Resolution obtained by using a dedicated Driver software
*2 When the panel is attached to a Plasma display produced by Panasonic Corporation.
Speci fi cations