manualshive.com logo in svg

Panasonic TY-TP50P10S - Touch-screen - Wired, Operating Instructions Manual

Share
Download
Panasonic TY-TP50P10S - Touch-screen - Wired Operating Instructions Manual Download Page 26

26

■

 Direction setting

direction of sensor against screen:
This area sets the sensor position of the touch 
panel. (p. 39)

Setting of area button:
This button creates virtual (area) buttons in the 
touch area and assigns operations to them. 
(p. 32)

Precise calibration (correction of distortion):
This button opens a dialog box for setting 
information displayed on the touch position 
correction window in detail. (p. 28)

Touch Panel Setup (Advanced Settings)

■

 Action setting

Range for reducing offset:
Unlike a mouse click, a touch can slip 
slightly. This slipping can be set so that it 
is recognized as a slip and not the user’s 
intention to drag an object. The higher the 
setting, the wider the slip area. (If set too 
low, clicking and double-clicking operations 
can be misinterpreted.)

Touch 

fi

 lter:

Because of sensor characteristics, the pen is sometimes judged to have 
touched the touch panel in a position slightly higher than the actual contact 
point, causing the cursor to move to an unintended position. When you select 
this checkbox, the displacement between the touched position and cursor 
position is neutralized, by delaying the touch recognition. However, follow 
degrades slightly.

Summary of Contents for TY-TP50P10S - Touch-screen - Wired

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands