17
English
Assembly Procedure
(Cont’d)
2. Attaching the pedestal bracket
Attaching to LF8/LF80 series (Display)
This procedure is unnecessary.
1) Place the pedestal brackets
to fit the holes at the
back of the display.
2) Fix with the 6 display installation screws
.
Tightening torque: 1.2 to 1.5 N•m
Note
●
Always use the specified holes to attach the pedestal.
Pedestal bracket
Display installation screw
3. Attaching the base
Attaching to LF8/LF80 series (Display)
The back of the display is combined with the brackets.
Attach the pedestal base in the same way.
1) Insert the base
to the pedestal bracket
.
●
The surface with the label goes to the back of the
display.
●
Be careful not to drop.
Base
Overturn-prevention
belt
Base installation screw
Label
2) Fix the base
with 2 base installation screws
.
●
Assemble the 2 overturn-prevention belts together
with the base installation screws
.
Tightening torque: 1.2 to 1.5 N•m
3) To stand the display vertically.
●
Make sure to hold the display with more than two
people.
