Panasonic TX-PR46G10, Service Manual

Page: 17 / 143

7 Disassembly and Assembly Instructions
7.1. Remove the Rear cover
1. See Service Hint (Section 3)
7.2. Remove the Fan
1. Unlock the cable clampers to free the cable.
2. Remove the screws (x3 ^ ) .
3. Remove the relay connectors and remove the Fan unit.
4. Remove the screw (x1 on the back side.
5. Remove the Fan.
7.3. Remove the P-Board
Caution:
To remove P.C.B. w ait 1 minute after power was off for dis­
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P7, P9, P11, P25,
P34 and P35).
3. Remove the screws (x9 and remove the P-Board.
7.4. Remove the Side terminal
cover and Rear terminal cover
1. Remove the claw (x 1 ^ ).
2. Remove the Side terminal cover.
17