Panasonic TX-PR46G10, Service Manual

Page: 21 / 143

1. Remove the SU-Board and SD-Board. (See section 7.10.
and 7.11.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (x8 and remove the SC-Board.
7.12. Remove the SC-Board
7.13. Remove the SS2-Board
1. Remove the Tuner unit. (See section 7.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis­
connect the flexible cable (SS58).
3. Remove the screws (x2 and remove the SS2-Board.
1. Remove the Tuner unit. (See section 7.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS61, SS63 and SS64).
5. Disconnect the bridge connector (SS21-SS24).
6. Remove the screws (x7 and remove the SS-Board.
7.14. Remove the SS-Board
7.15. Remove the Hanger metals and
the Stand brackets
1. Remove the Plasm a panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasm a panel surface facing
downward.
2. Remove the Hanger metals (L, R) fastening screws (x4
^ each) and remove the Hanger metals (L, R).
H anger metal R Hanger metal L
_ 1 T
Ц
*
7 1 W
Э И " M E
JLJ П !
^ . • .
7 1 w
» 9 h ' •
Л
^
* • ’ •
!
ъ .
•
1
■*"1 * [ I
3
I
•
s 3 s е в " " П н " " й T i i - Щ е
Я w f t . . ■ и ;
Stand bracket R Stand bracket L
21