English
6
Assembling / Removing the pedestal
Assembly screw (4)
M5 × 16
Bracket
Cover
Assembly screw (4)
M4 × 10
Base
Cable clamp (4)
(p. 10)
Assembling the pedestal
2
3
B
E
A
C
D
1
Adjusting the panel to your desired angle
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Secure the base as shown below to prevent the TV
from falling over.
The place where the base is secured should be thick
enough and made of hard material.
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1
Remove the assembly screws from the cover.
2
Pull out the cover.
3
Lift the TV from the pedestal.
4
Remove the assembly screws from the bracket.
