English
19
3D Eyewear
Dimensions (W × H × D)
165 mm × 38 mm × 166 mm
Mass
Approx. 18 g
Usage temperature range
0 °C - 40 °C
Materials
Main body / Lens section: Resin
Use Panasonic 3D Eyewear supporting passive 3D system technology.
Note
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
For the information of power consumption, display resolution, etc., please refer to Product fiche.
For the information of the open source software, refer to [eHELP] (Support > Licence).
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024
LCD Television
Declaration of Conformity (DoC)
“Hereby, Panasonic Corporation declares that this TV is in compliance with the essential requirements and other
relevant provisions of the Directive 1999/5/EC.”
If you want to get a copy of the original DoC of this TV, please visit the following website:
http://www.doc.panasonic.de
Authorized Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
This TV is intended to be used in the following countries.
Denmark, Finland, Norway, Sweden
The wireless LAN feature of this TV shall exclusively be used inside buildings.
When using the wall-hanging bracket
Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
Rear of the TV
Holes for wall-hanging bracket
installation
400 mm
Depth of screw
minimum: 6 mm
maximum: 10 mm
Diameter: M6
400 mm
(View from the side)
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
