background image

3

Maintenance

Caution

When cleaning the TV, remove the mains plug

 

Cleaning an energised TV may cause electric shock.

Remove the mains plug from the wall socket 

when the TV is not in use for a prolonged 

period of time

 

This TV will still consume some power even in the Off 

mode, as long as the mains plug is still connected.

Do not expose your ears to excessive volume 

from the headphones

 

Irreversible damage can be caused.

Do not apply strong force or impact to the 

display panel

 

This may cause damage resulting in injury.

Do not block the rear air vents

 

Adequate ventilation is essential to prevent failure of 

electronic components.

 

Ventilation should not be impeded by covering the 

ventilation openings with items such as newspapers, 

table cloths and curtains.

 

We recommend that a gap of at least 10 cm is left all 

around this TV even when placed inside a cabinet or 

between shelves.

 

When using the pedestal, keep the space between the 

bottom of the TV and the surface where the TV is set.

 

If pedestal is not used, ensure the vents in the bottom 

of the TV are not blocked.

Minimum distance

10

10

10

10

(cm)

Maintenance

First, remove the mains plug from the socket outlet.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet, 

or pedestal by using a soft cloth to clean the dirt or 

fingerprints.

For stubborn dirt:

First clean the dust on the surface. Dampen a soft cloth 

with clean water or diluted neutral detergent (1 part 

detergent to 100 parts water). Wring the cloth and wipe the 

surface. Finally, wipe away all the moisture.

Caution

 

Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.

 

Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.

 

Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may 

degrade surface quality or cause peeling of the paint.

 

The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the 

surface with your fingernail or other hard objects.

 

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may 

degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.

Summary of Contents for TX-L32EM6Y

























Reviews: