20
English
Retuning from Setup
Menu
Automatically retunes the channels received in the area.
●
This function is available if channel tuning is already
performed.
●
Only the selected mode is retuned. All the previous
tuning settings are erased.
●
Child Lock PIN number is required to retune locked
channels.
1
Display the menu and select
[Settings]
select
access
2
Select [Satellite installation] /
[Antenna/cable installation]
select
access
3
Select the item and press OK to
access
select
access
Start the Installation
■
Update Channels
1
Select [Update channels].
select
access
You can always start a channel update manually, new
channels will be added, and unavailable channels will
be removed.
Automatically Search for Channels
1
Select [Automatic channel update].
●
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
●
New channels are stored in the All channels list and
New channels list. Empty channels are removed.
●
If new channels are found or if channels are updated
or removed, a message is shown at TV start up.
The TV must be in standby to automatically update
channels.
Channel Update Messages
When new channels are found or if channels are
updated or removed, a message is shown at TV start up.
To avoid this message to appear after every channel
update, you can switch it off.
Satellite
(if available)
●
You can install up to 4 satellites on this TV. Select the
number of satellites you wish to install at te start of
the installation. This will speed up the installation.
●
You can use a Unicable system to connect the
antenna dish to the TV. Select Unicable for 1 or for 2
satellites at the start of the installation.
Re-install Channels
1
Select [Satellite installation] > [Search for satellite].
2
Select [Re-install channels].
3
Select [Settings] or select [Start] to update channels.
■
Settings Menu
●
Connection type
Select the number of satellites you want to install.
The TV sets the appropriate connection type
automatically.
■
LNB settings
In some countries, you can adjust the expert settings
for homing transponder and each LNB. Only use or
change these settings when a normal installation fails.
If you have non-standard satellite equipment, you can
use these settings to overrule the standard settings.
Some providers might give you some transponder or
LNB valeus which you can enter here.
Manual Installation
Manually install satellite channels if needed.
1
Select [Satellite installation] > [Manual Installation].
■
LNB
Select the LNB for which you want to add new
channels.
■
Polarisation
Select the polarisation you need.
■
Symbol rate mode
Select [Manual] to enter symbol rate.
■
Frequency
Enter the frequency for the transponder.
■
Search
Search for transponder.
