manualshive.com logo in svg

Panasonic TX-22LT3, Operating Instructions Manual

Share
Download
Panasonic TX-22LT3 Operating Instructions Manual Download Page 5

5

Adjust the stand to your desired angle. The stand angle can be adjusted 15 

°

 backward.

How to use the LCD stand

Quick Start Guide

RF lead

Antenna Input socket

ANTENNA

1

1. Connecting the TV directly to an Antenna only

Connect the RF lead into the TV Antenna
Input socket (

).

Choose Your Connection Type

Connection and setting up options
 • If connecting the TV using an RF lead only, see below.
 • If connecting the TV using Scart and RF leads, see page 6.
 • If connecting the TV to a Q-Link (or Q-Link compatible) VCR, see page 6.
 • If connecting the TV to a Q-Link (or Q-Link compatible) VCR and a satellite receiver, see page 7.

What is Q-Link?
Q-Link allows direct communication between the TV and a Q-Link (or Q-Link compatible) VCR, this will
enable features such as downloading of tuning information from the TV to the VCR.

Further information on Q-Link can be found on page 13.
In order for Q-Link to function correctly, the Scart leads must be connected as shown in connection
diagram, dependent on whether the TV is being connected to a VCR or to a VCR and Satellite Receiver.

Note:
Additional equipment and lead are not
supplied.

Summary of Contents for TX-22LT3





































Reviews:

No comments

Brands by name

Popular brands

Load more brands