Panasonic TX-22LT3, Operating Instructions Manual

Page: 4 / 36

4
Fitting remote control batteries
Slide off the battery cover
Insert batteries - note correct
polarity (+ and -)
Two “R6 (UM3)” size
Replace the cover
1 2 3
• Make sure that the batteries are fitted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni - Cad) batteries.
Antenna cover removal and fitting
Removal
Fitting
1.Push up hooks and pull the cover slightly towards yourself to
disengage the claws (at 4 points).
2.Slowly pull out in the downward direction.
1.Insert the claws (at 4 points) at the bottom end.
2.Push it until hook will be cricked.
S-VIDEO
S-VIDEO
Y
Y
L
R
L
R
VIDEO
VIDEO
AUDIO
AUDIO
PB
PB
PR
PR
1
2
1
2
COMPON
ENT VID
EO INPUT
L
R
L
R
VIDEO
VIDEO
AUDIO
AUDIO
INPUT
2
1
Hook
Note:
To avoid interference appearing on the screen, do not bundle the antenna wire and AC adaptor wire together.
Note:
Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be
routed through the antenna cover.
1. Disengage the claws at the
uppermost end.
2. Slowly pull out in the upward
direction.
1. Insert the claws (at 2 points) at
the bottom.
2. Push it until click.
1
2
1
2
Cable cover removal and fitting
Removal Fitting