6
Quick start Guide
1. Choose Your Connection Type
Connection and setting up options
• If connecting the TV using an RF cable only, see below.
• If connecting the TV using Scart and RF cables, see page 7.
• If connecting the TV to a Q-Link (or Q-Link compatible) VCR, see page 7.
• If connecting the TV to a Q-Link (or Q-Link compatible) VCR and a satellite receiver, see page 8.
What is Q-Link?
Q-Link allows direct communication between the TV and a Q-Link (or Q-Link compatible) VCR, this will enable
features such as downloading of tuning information from the TV to the VCR.
When using a “NEXTVIEWLINK” VCR the main features possible are the following:
• Preset Download
Downloading of tuning information from the TV to the VCR.
• Direct TV Record
For immediate recording of the current program (What You See Is What You Record).
When using a “Q-Link” VCR the main features possible are the following:
• Preset Download
Downloading of tuning information from the TV to the VCR.
• Direct TV Record
For immediate recording of the current program (What You See Is What You
Record).
• TV/VCR Auto Power On
When the VCR plays a tape the TV will automatically switch On (From Stand-
by) and select the AV2 input.
• VCR Auto Power Stand-by
When the TV is switched into Stand-by, the VCR will also switch into Stand-by.
• VCR Image view On
If the TV is in Stand-by mode and the VCR sends a menu to be displayed on
the TV screen (e.g. Main menu), the TV will automatically switch On and the
menu will be displayed.
This TV will also communicate with other VCRs that bear the following logos:
• “DATA LOGIC”
(a trademark of Metz Corporation).
• “Easy Link”
(a trademark of Philips Corporation).
• “Megalogic”
(a trademark of Grundig Corporation).
• “SMARTLINK”
(a trademark of Sony Corporation).
These VCRs may support some or all of the above funcitons. Refer to the VCR operating instruction book.
Further information on Q-Link can be found on page 30.
In order for Q-Link to function correctly, the Scart cables must be connected in a certain way, dependent on
whether the TV is being connected to a VCR or to a VCR and Satellite Receiver.
1. Connecting the TV directly to an aerial only
RF connection
Connect the Aerial lead into the TV Aerial socket (
).
Aerial Input socket
Aerial
(Not Supplied)
LCD TV
Aerial Lead
