29
Tuning your VCR and satellite receiver
Your new TV has a programme position ‘0’ to receive RF signals from your VCR, although a Scart connection is
preferable if the VCR is so equipped (see page 7 or 33 for suitable inputs to the Scart socket on this TV).
If your VCR is tuned to a different RF channel, you will not receive any picture or sound. Either adjust the tuning
of the TV’s programme position ‘0’ (follow the instructions below) or adjust the RF channel of your VCR (some
VCRs allow adjustment of their RF channel via their remote control unit) or both until the TV receives the RF
output channel of your VCR.
Refer also to the instruction books for your equipment.
Tuning your TV to the VCR
Switch on the VCR, insert and play a pre-recorded tape with known content
1
Press
SET UP
.
2
Move to Tuning menu option by using
or
.
3
Access Tuning menu by using
or
.
4
Move to Manual tuning by using
or
.
5
Access Manual tuning by using
or
.
6
Select programme position ‘0’ VCR by using
or
.
7
Start searching for the VCR playback by using
or
.
When the VCR playback is found, press
STR
to store.
Press
TV/AV
to exit.
Notes:
• If picture patterning occurs on programme position ‘0’ it may be
necessary to adjust the RF output channel of the VCR, refer to the
VCR instruction book.
• If a Satellite Receiver and a VCR are going to be used with RF cable
connections set them to different channels.
Refer to the Satellite Receiver and VCR instruction books for precise
tuning information.
VCR
Manual tuning
21 68
CH44
VCR
The tape is found and displayed.
Press
STR
to store the setting.
0
C
STR
N
TV/ DVD
INDEX
F.P.
TV/ TEXT
HOLD
TV/AV
VCR
ASPECT
SET UP
SOUND
PICTURE
Summary of Contents for TX-15LV1
Page 35: ...35 DVD CD Operation Guide...
