Operating Instruction Book
TU-HDT105A
Audio Mode Priority
The Audio mode allows you to adjust the audio setting. You may choose Dolby
Digital (Dolby D), MPEG1 and MPEG2. Use
to select your choice. Like the
Audio Language Priority setting, this audio mode setting determines your initial
choice of soundtrack based on the audio mode, and you may select any soundtrack
channel by channel, regardless of the audio mode setting made in this menu.
If the default Audio Mode is Dolby D, and the input signal contains only MPEG2, the
ll change to MPEG2 automatically. If the Audio Mode is set to Dolby
D, the digital receiver will automatically select a Dolby D soundtrack when it is
selection if you will be connecting your receiver to a
TV or A/V receiver that can decode Dolby Digital (look
logo) or Dolby
Surround Pro Logic (look for the
ogo).
l
Audio
igital Audio Selection Options.
Digital Audio Selection Options
default Mode wi
available.
We especially recommend this
for the
l
Digita
For each Audio Mode, you can have different D
(Refer to Table 2, Digital Audio Selection Table)
Table 2: Digital Audio Selection Table
Default Audio Mode
Dolby Digital
Bitstre
PCM
am
(stereo)
3. Off
MPEG-2
Same as above
MPEG-1
PCM (stereo)
2. Off
o
*Bitstream: select this if your TV or A / V receiver has a digital audio input and can decode
Dolby Digital
ital program is
being received.
Stereo
Surround
o
*PCM (stereo): select this if your TV or A / V receiver has a digital audio input but can not
decode Dolby Digital
o
*Off: select this if you want the digital audio output to mute when a Dolby Dig
You can toggle Stereo Surround on or off by pressing
and
OK.
On: Surround information will be included in stereo output (Lt/Rt)
Off: Pure stereo audio output (L/R)
Audio
Balance
You can adjust the value from L+7 to R+7. The selection “0” means balanced (equal
level) output on the two front speakers.
20
