Operating Instruction Book
TU-HDT105A
Mode C (SD, TV/CVBS)
(D) CVBS / S-Video Connection
Connect the CVBS composite video output
socket on your digital receiver to your TV’s
CVBS video input socket.
Connect the S-Video (Y/C) component video
output socket on your receiver to your TV’s S-
Video input socket.(Refer to D)
Note: Cable is not supplied.
Note: When unit is in Mode C, there is no
output from the YPbPr sockets.
Audio
Connections
(E) Digital Audio Connection
(a) Digital Audio
If your display device is equipped with Dolby
Digital and/or MPEG audio decoding
capability,
you may connect the Digital Audio output of
your digital receiver to the display device’s
Digital Audio input using either the Optical or
Coaxial RCA socket. (Refer to E) You may
also connect the digital audio output to your
A/V receiver if it is capable of decoding a
Dolby Digital / MPEG digital audio stream.
Note: Cable is not supplied.
(b) Analogue Audio
(F) Analogue Audio Connection
If your display device and/or A/V receiver does
not support Dolby Digital / MPEG decoding,
you will need to connect the L/R Audio output
RCA sockets on your digital receiver to the
stereo L/R Audio inputs of your display device
and/or A/V receiver.
(Refer to F). If your A/V receiver supports
Dolby Pro Logic decoder, you can switch ON
the “Stereo Surround” function (Page 20).
8
