background image

28

Battery Power

The “Battery Recalibration” function measures and memorizes the battery capacity. To correct the battery display, use this 
function to fill the battery and then discharge it completely. Perform the procedure at least once immediately after purchasing 
the computer. Normally the interval of “Battery Recalibration” is three months. The battery display may not be correct when 
the battery pack deteriorates after a long time use. In this case, perform the procedure again.

1

Connect the AC adaptor.

2

Close all the applications.

3

Perform “Battery Recalibration”.

A

Click 

 

 (Start)/

 [start] - [All Programs] - [Panasonic] - [Battery] - [Battery Recalibration].

B

When the confirmation message appears, click [Start].

z

Frequent recalibration of the battery can degrade the battery. A caution message appears when the “Battery 
Recalibration” is performed at the shorter interval than approximately a month. In this case, cancel the “Bat-
tery Recalibration”.

C

When the message requests shut down of Windows, click [Yes].
The “Battery Recalibration” starts.
After the battery pack is fully charged, discharging starts. When the discharging is completed, the power goes off 
automatically.

After the “Battery Recalibration” is finished, normal charging starts.

CAUTION

z

Do not close the LCD while “Battery Recalibration” is being executed.

NOTE

z

The temperature range should be 10

°

C to 30

°

C {50

°

F to 86

°

F}.

 

If “Battery Recalibration” is executed at low temperatures, recalibration may not be performed properly.

z

The “Battery Recalibration” may take a long time due to the large battery capacity. This is not a malfunction.
When using the battery pack (CF-VZSU51W)
• Full charge: Approximately 5 hours [MAX]
• Complete discharge: Approximately 5 hours
When using the battery pack (CF-VZSU52W)
• Full charge: Approximately 4 hours [MAX]
• Complete discharge: Approximately 3 hours

z

“Battery Recalibration” does not increase the battery’s capacity. If “Battery Recalibration” is executed frequently, dete-
rioration of the battery may result.

z

If you have two or more battery packs, perform the “Battery Recalibration” for each battery pack.

Correcting the Battery Display (Battery Recalibration)

Windows 7

Windows XP

Summary of Contents for Toughbook CF-T8EWATZJM






































































































































Reviews: