14
Using the Touchscreen
Calibrating the Touchscreen
When you cannot point correctly with the stylus (included), calibrate the Touchscreen by following the steps below.
A standard user needs to perform the calibration as an administrator before performing the calibration for each user.
Calibration by an administrator
NOTE
z
At first, log on to Windows as an administrator, and perform this calibration.
z
Rotate the display to 0 degree before performing the calibration. (
).
1
Run [Tablet PC Settings].
Click
(start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
2
Click [Calibrate].
3
If [User Account Control] is displayed, and click [Yes].
4
Using the stylus, touch each of the “+” target marks one by one.
“
+
”
is displayed in order at 16 locations.
Calibration by a standard user
NOTE
z
Perform the following calibration for each user.
1
Run [Tablet PC Settings].
Click
(start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
2
Click [Calibrate].
3
Using the stylus, touch each of the “+” target marks one by one, and then click [OK].
Windows 7
