Panasonic Toughbook CF-F8EWAZZJM, Operating Instructions Manual

Page: 27 / 48

27
Getting Started
Usef
ul Inform
ation
Troubleshooting
Appendix
Intel
®
Active Management Technology (Intel
®
AMT)
<Only for model with Intel
®
AMT>
Intel
®
AMT offers the operational management function and security function through network.
1 Turn on the computer, and press
F2
or
Del
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
z If the password is requested, enter the Supervisor Password.
2 If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
3 Select the [Security] menu, and select [AMT Configuration], and press
Enter
.
4 Select [Intel(R) AMT] and press
Enter
.
5 Select [Enabled] and press
Enter
.
6 Select [Intel(R) ME Setup Prompt] and press
Enter
.
7 Select [Enabled] and press
Enter
.
8 Press
Esc
.
If you do not use the Supervisor Password, clear the Supervisor Password following steps.
A
Select [Set Supervisor Password], and press
Enter
.
B
Enter the Current Password, and press
Enter
.
C
Press
Enter
when the [Create New Password] display is shown.
D
Press
Enter
when the [Confirm New Password] display is shown.
9 Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart.
The following procedures are example. It is different according to your environment. Contact your technical sup-
port office.
A
Press
Ctrl
+
P
when [Press <CTRL - P> to enter Intel(R) ME Setup] is shown after the [Panasonic] boot
screen disappears.
B
Enter “admin” in [Intel(R) ME Password], and press
Enter
.
C
Enter the New Password in [Intel(R) ME New Password] to change the password, and press
Enter
.
At confirmation message, enter the password, and press
Enter
.
Write down new password to remember you password.
The password has the limitation
(
Î page 28).
D
Select [Intel(R) ME Configuration], and press
Enter
.
At the confirmation message, press
Y
.
E
Select [Intel (R) Features Control] and press
Enter
.
F
Select [Manageability Feature Selection] and press
Enter
.
G
Select [Intel (R) AMT] and press
Enter
.
H
Select [Return to Previous Menu] and press
Enter
.
I
Select [Return to Previous Menu] again and press
Enter
.
J
Select [Intel(R) AMT Configuration] and press
Enter
.
K
Select [SOL/IDE-R] and press
Enter
then, press
Enter
on the [Caution] screen.
Set all the items to [Enable] on the screen. Change other settings as necessary.
L
Select [Return to Previous Menu] after setup is complete.
Follow the on-screen instructions.
The computer will restart.
Setting AMT configuration
DFQW5315ZA_F8mk1.5-OI_V_M.book 27 ページ ２００９年７月１０日 金曜日 午後１時２５分