3
Pressing this key combination adjusts the brightness
of LCD. The brightness setting is stored in memory
separately under the condition the AC adaptor is
connected and under the condition the AC adaptor
is not connected.
By pressing this key combination, you can select ei-
ther an external display, LCD or simultaneous.
(
page 44
)
This combination does not work in the following cases:
When the [MS-DOS Prompt]*
1
screen is set to “Full
Screen”.
Windows 98
When the computer is in the Dual-
Display mode.
Pressing this key combination turns on/off audio from
the internal speaker and headphone jack. Rebooting
the computer, or powering off then on, restores the
speaker setting of the Setup Utility.
Pressing this key combination adjusts the volume
of the internal speakers and headphone jack.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. (
page 16
)
Pressing this key combination displays the remain-
ing battery capacity on the screen. (
page 31
)
Pressing this key combination causes the current
screen on the display to be saved to the hard disk,
and powers off the computer. (
page 16
)
LCD brightness con-
trol ( down)
LCD brightness con-
trol ( up)
Display change
Speaker on/off switch
Volume control
( down)
Volume control
( up)
Power off using the
standby function
Remaining capacity of
the battery pack
Power off using the
hibernation function
Key
Functions
Popup Window
Key Combinations
CAUTION
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse), touchscreen or other keys.
Fn + F3
Fn + F4
Fn + F5
Fn + F7
Fn + F6
Disabling the speaker will also disable the
warning beep.
This key combination may not work when
speaker is connected to the USB port.
This key combination cannot be used to ad-
just the volume of the warning beep.
This key combination may not work when
speaker is connected to the USB port.
Fn + F2
OFF
ON
Down
Up
*
2
*
1
Windows 2000
Windows NT
: [Command Prompt]
*
2
When [Disable] is set for [Fn+F7/Fn+F10 Key] with the Setup Utility, these key combinations become inoperable.
Fn + F10
*
2
Fn + F1
R e m a i n i n g
capacity (%)
display
Battery pack is
not installed.
%
A
%
B
%
A
78
%
B
Fn + F9
CAUTION
NOTE
CAUTION
Do not switch displays repeatedly using the this
combination while MPEG files are playing.