35
PC Card / ExpressCard
You can insert the following cards.
ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A)
(Only for model with ExpressCard slot)
PC Card Type
I
(3.3 mm) or
II
(5.0 mm) to the PC Card slot (B)
For model with Smart Card slot (
)
NOTE
The following types of card are not supported:
PC Card Type
III
(10.5 mm), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards
that require 12 V of operating voltage.
Do not start up Windows with a storage type of CardBus PC card attached. An error may occur.
Dummy cards are inserted into both of the slots at the factory.
First remove the dummy cards.(
Step
1
)
Be sure to insert each dummy card when the slots are not in use.
Insert the appropriate dummy card in the correct card slot. Insert the dummy PC Card in the PC Card slot, and the
dummy ExpressCard in the ExpressCard slot.
Inserting a dummy card in the wrong slot may cause malfunction of the computer.
To insert the card
1
Open the cover.
A
Slide the latch (C) to the right to unlock the cover.
B
Slide the latch (C) down, and open the cover.
Inserting/Removing the Card
