![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-19ddgzxvm/toughbook-cf-19ddgzxvm_operating-instructions-manual_4272851017.webp)
17
Getting Started
During setup of Windows, use the touch pad and keyboard to move the cur-
sor and to click an item.
CAUTION
You can change the user name, password, image and security setting after
setup of Windows.
Remember your password. If you forget the password, you cannot use Win-
dows. Creating a password reset disk beforehand is recommended.
Wait until the hard disk drive indicator has turned off.
Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-
count name) that includes the “@” mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to log on without en-
tering a password, “The user name or password is incorrect.” may be displayed
and you will not be able to log on to Windows ( page 28).
The wallpaper for the
fi
rst logon user has already been preset on “
5
Setup Windows.”.
When using this computer under the Sun, the screen becomes easily viewable
by changing the wallpaper to the white wallpaper.
A
Right-click on the desktop, and click [Personalize] - [Desktop Background].
B
Select [Solid Colors] at [Picture Location].
C
Select the white wallpaper and click [Save changes].
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard or touch pad, and wait
until the screen changes.
If “An unexpected error has occurred ...” (or a similar message) is displayed,
click [OK]. This is not a malfunction.
6
Perform the touchscreen calibration.
<Only for model with touchscreen>
NOTE
At
fi
rst, log on to Windows as an administrator, and perform this calibration.
Return the rotated display to [Primary Landscape] before the touchscreen calibration.
A
Click
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].
B
Click [Calibrate].
C
Using the stylus, touch each of the “+” target marks one by one.
NOTE
Perform the following calibration for each user.
A
Click
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].
B
Click [Calibrate].
C
Using the stylus, touch each of the “+” target marks one by one, and then click [Yes].
Perform the calibration for the orientation to be used.
A
Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
B
Using the stylus, touch each of the 12 “+” target marks one by one until it
blinks, and then press
Enter
.
C
Press
Enter
.
<Only for model with Dual Touch>
NOTE
Perform these calibration for each user.
If you cannot touch the desired position, perform Digitizer Calibration again and
restart the computer.
CF-19mk4(DFQW5354ZB)_OI_US.indb 17
CF-19mk4(DFQW5354ZB)_OI_US.indb 17
9/13/2010 11:38:50 AM
9/13/2010 11:38:50 AM