background image

54

SD Memory Card

CAUTION

Do not remove or insert the SD Memory Card until Windows has completed loading.
Do not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.
• While the computer is in sleep

*2

 or hibernation.

• While the SD Memory Card indicator 

 is on.

• While data is being read from or written to the card.
• Immediately after the writing operation. 

 

The computer may still continue the access to the card just after writing operation. If you remove the card before the 
operation is completed, the data may be damaged or the card access may no longer be performed normally.

Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages, 
direct or indirect.
Do not forcibly draw out the card, otherwise the slot may be damaged.
Insert the card in the correct direction, otherwise the card and the slot may be damaged.
After resuming from sleep

*2

 or hibernation, do not access the SD Memory Card for approximately 30 seconds.

*2

Windows XP: standby

To insert the card

1

Open the cover.

A

Slide the latch (A) to the right to unlock the cover.

B

Slide the latch (A) down, and open the cover.

2

Insert the SD Memory Card with the label side facing up and with 
the cut corner facing in.

Inserting/Removing the SD Memory Card

Summary of Contents for Toughbook CF-19AHJAX1M





















































































































































Reviews: