background image

111

Setup Utility

Boot Prompt Configuration

Underlined items are the factory presets.

Security Menu

Setup Utility Prompt

• When [Setup Utility Prompt] is set to [Disabled], the message “Press F2 for Setup / F12 for LAN” 

is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message 
is not displayed.

Disabled
Enabled

Boot Popup Menu

Disabled
Enabled

Password On Boot

Disabled
Enabled
Auto

Password On Reboot

Disabled
Same as Boot

Password On Resume

• Can be changed only when [Password On Boot] is set to [Enabled].

Disabled
Enabled
Auto

Boot Device on Hibernation Resume

Try prior devices
Hard Disk only

Set Supervisor Password

Enter the sub-menu.

Hard Disk Lock

• Can be changed only when [Set Supervisor Password] is set.

Disabled
Enabled

User Password Protection

No Protection
Protected

Set User Password

• Can be changed only when [Set Supervisor Password] is set.

Enter the sub-menu.

Intel(R) Anti-Theft Technology

Inactive
Active
Stolen
Suspend

Suspend mode transition

• Can be changed only when [Intel(R) Anti-Theft Technology] is set to [Active].

Disabled
Enabled

Summary of Contents for Toughbook CF-19AHJAX1M





















































































































































Reviews: