background image

51

PC Card / ExpressCard

NOTE

<Only for model with Smart Card slot>

z

The upper slot (D) is the PC Card slot, and the lower slot (E) is the Smart Card slot. Express Cards cannot be used.

 

For how to insert/remove a Smart Card: (

Î

 

page 56

)

„

To remove the card

1

Disable the card function.

A

Click 

 on the notification area and click 

.

B

Select the card.

A

Double-click 

 on the notification area and select the card, then click [Stop].

B

Follow the on-screen instructions.

z

These steps are not necessary when removing the card after turning off the computer.

2

Open the cover and remove the card.

A

Press the eject button (F). The eject button pops out.

B

Press the eject button (F) again so the card comes out of the slot.

C

Draw the card straight out.

NOTE

z

Check the card’s specification to prevent the total operating current from exceeding the allowable limit. Otherwise mal-
function may occur.

 

Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA

z

Some types of cards cannot be used simultaneously.

z

After repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.

z

If the computer freezes after resuming from sleep

*1

 or hibernation, remove and reinsert the card. If the problem per-

sists, restart the computer.

z

When a card is inserted, power consumption increases. Remove the card when it is not in use, especially when oper-
ating by battery power.

Summary of Contents for Toughbook CF-19AHJAX1M





















































































































































Reviews: