16
Operator List
Since the operator is usually selected automatically, it is not necessary to change it.
To change the settings manually, perform the following procedures.
Select the mode from [Operator selection mode].
Auto:
the operator is selected automatically
Manual:
keep trying to connect the operator se-
lected manually
Preferred: try to connect the operator selected manu-
ally. If it fails, the mode will change to
[Auto].
When you select [Manual] or [Preferred], select [Scan]
and select operator from the scanned list, then select
[Register].
Since these settings are saved even after the GSM/GPRS modem is turned off, next
time the power is turned on the GSM/GPRS modem will try to connect using the last
settings.
We recommend that you change the mode to [Automatic] when moving out the
selected operator’s range.
GPRS modem / SIM card information
Select [About] to confirm GPRS modem / SIM card information.
The information is displayed only when the GSM/GPRS modem’s power is on.
[Wireless Module]
Model: Module name
Rev:
Firmware version number
IMEI: International Mobile station Equipment Identity
[SIM card information]
IMSI: International Mobile subscriber Identity
ICC ID: Card identification number
NOTE
Using CheckNet
Summary of Contents for Toughbook CF-18FDNZXVM
Page 21: ...21 PCE0124A_2K XP T ...
