12
Using CheckNet
RAS (Dial-up network) Control
You can start up RAS (Dial-up network) from CheckNet by allocating a dial-up network for
each button.
1
Set up the Dial-up network
(
page 11, 15)
2
Select [Options] - [RAS] and select dial-
up network you prefer for [GPRS] or
[GSM].
You can connect the network by selecting [GPRS Dial]
or [GSM Dial].
To start up GSM/GPPS connection automatically when
CheckNet starts up, select the connection at [Connect at
start-up].
To reconnect the line automatically when resuming from
standby/hibernation mode, add the check mark for [Re-
connect when resuming from standby/hibernation(GPRS)].
To reconnect the line automatically when it is lost, perform the following procedure.
Windows 2000
Select [Start] - [Settings] - [Network and Dial-up Connections] and right-click the con-
nection you created, then select [Properties] - [Options] and add the check mark for
[Redial if line is dropped].
Windows XP
Tablet PC
Select [Start] - [Connect To] and select the connection you created, then select [Proper-
ties] - [Options] and add the check mark for [Redial if line is dropped].
NOTE
Summary of Contents for Toughbook CF-18FDNZXVM
Page 21: ...21 PCE0124A_2K XP T ...
