![background image](http://html1.mh-extra.com/html/panasonic/touchbook-cf-50-series/touchbook-cf-50-series_reference-manual_4061670046.webp)
46
Technical Information
Network
When the power saving function is running, communications software may malfunction.
For example, communications may be halted if the standby (hibernation) mode is acti-
vated. The computer must be restarted if one of these modes is entered during data
communications.
Be sure that the power of the display is off (for energy conservation purposes) or the
computer enters standby (hibernation) mode after the communications software is closed.
Windows 2000
When network or communication software is to be used, set [Turn off monitor], [Turn off
hard disks], [System standby] and [System hibernates] (in [Start] - [Settings] - [Control
Panel] - [Power Options]) to [Never].
Windows XP
When network or communication software is to be used, set [Turn off monitor], [Turn off
hard disks], [System standby] and [System hibernates] (in [start] - [Control Panel] -
[Performance and Maintenance] - [Power Options]) to [Never].
Precautions When Using a CardBus Type LAN Card
Prior to usage, optimize the LAN card settings by following the procedure given below.
Failure to do so may result in an error message being displayed when performing a
copy operation via the LAN card with a computer on the network.
1
Select the network card you are using from [Network adapters] in [Control Panel] -
[System] - [Hardware] - [Device Manager]
2
Select [Advanced], select [Store And Forward] from [Property], then set [Enable] for
[Value] if it is set to [Disable]
(This item may be unavailable for some types of network cards.)
Windows 2000
When using the Files on the Retail Version of the Windows CD-ROM
The Windows files included in the Retail Version of the Windows CD-ROM for each OS
are contained in the following folders:
Windows 2000
c:\winnt\cdimage
Windows XP
c:\windows\docs, c:\windows\i386, c:\windows\support, c:\windows\valueadd
If you install the Recovery Console, you can use the command prompt to execute op-
erations such as CHKDSK in cases where, for example, Windows XP will not start. Use
the following procedure to install Recovery Console. This procedure allows you to select
Recovery Console as a startup option during startup.
1
Select [start] - [Run] and input [c:\windows\i386\winnt32.exe /cmdcons], then select
[OK].
Follow the on-screen instructions.
2
Select [start] - [Run] and input
[c:\util\msupdate\q308402\q308402_wxp_sp1_x86_enu.exe], then select [OK].
Recovery Console
Windows XP
For an overview of Recovery Console, refer to [Help and Support].
1
Select [start] - [Help and Support].
2
Enter “Recovery Console” under [Search], then select
.
NOTE