background image

20

Reinstalling Software

Before Reinstallation

 Preparing

Reinstalling

CAUTION

If data on your hard disk is compressed, the data should
be uncompressed.

 Important

 Save all important data.  If reinstallation is carried out, all data existing prior to the installation will be lost.  The reinstal-

lation will return the computer to factory condition.

 Be sure to remove all PC Cards and disconnect all peripherals before the reinstallation procedure.
 Be sure the AC adapter is connected until completing reinstallation.

If you have not created the FIRSTAID FD, you can create by selecting [Create FIRSTAID FD] in [Start]-[Programs]-
[Panasonic].  If for some reason, you do not have this disk or it is corrupted, please contact Panasonic Technical Support.

NOTE

 Windows 95  

(HDD format)

You will need the FIRSTAID CD, CD-ROM included in the Windows 95 System Pack and the FIRSTAID FD you made
earlier.

Microsoft Windows 95 Startup Menu

1. Boot
2. Initialize the HDD for the Hibernation function
3. Restore the HDD to factory default

Enter a choice: 1

1

Insert the FIRSTAID FD, and  turn the computer on.

2

When the message [Press F2 to enter Setup] is displayed,
press    

F2

    and then run the Setup Utility.

If the password has been set, enter the supervisor pass-
word.

3

Press    

F9

  .

At the confirmation message, select [Yes] and press

Enter

   .

4

Select [Power] menu and set [Power Management] to
[Disable] and [Power Switch] to [Off].

5

Press    

F10

  .

At the confirmation message, select [Yes] and press

Enter

   .  The computer will reboot, and this screen

should appear.

6

To use the hibernation function, follow this proce-
dure and be sure to create the hibernation partition.
If you decide not to create the hibernation partition,
go on to step 

7

Select [2.Initialize the HDD for the Hibernation
function].

At the confirmation message, press         .
When the message [Press any key to continue...] is
displayed, confirm that the FIRSTAID FD has been
set in the floppy drive, and then press a key.
The computer will reboot.

2

3

1

With the exception of the instruction below, please
select all default values displayed by the Setup Wiz-
ard.  Be sure to add the check mark 

to [Sound,

MIDI, or Video Capture Card] at the [Analyzing
Your Computer].
Have a floppy disk on hand to create a "Windows
95 Startup Disk".  Immediately after creating this
disk, enter the FIRSTAID FD into the floppy disk
drive and press [OK].  (Note: A system error will
result if the FIRSTAID FD is not inserted.  If this
occurs, insert the FIRSTAID FD and press [Retry].)

7

 Select [3. Restore the HDD to factory default].

8

 At the confirmation message, press any key.

9

 When your computer prompts you to insert the

FIRSTAID CD, please set the specified CD and press
any key.

10

 When your computer prompts you to insert the "Win-

dows 95 CD-ROM", please set the specified CD  and
press any key.

11

 When the [To continue, press ENTER...] appears, press

Enter

  .

After Microsoft ScanDisk completes, the computer will
automatically return to the Windows 95 setup.
Simply follow the on-screen instructions.

 Windows 95  

(reinstalling)

NOTE

12

At the [Finishing Setup], remove the floppy disk and
press [Finish].  Windows will restart after all the set-
tings have automatically been made.   If the computer
asks you to insert the Windows 95 Disk, press [OK].
Input [c:\cabs], then press [OK].

13

At the [Date/Time Properties], press [Close].

14

At the [Add Printer Wizard], press [Cancel].

15

When the display appears indicating the establishment
of the system settings, press [OK].  The computer will
reboot.

 

Y

Summary of Contents for Touchbook CF-45

































Reviews: