11
1
Open the display
Starting Up/Shutting Down
Starting Up
2
Turn your computer on
If security indicator (
) is displayed,
you must first enter your User Password (
"Security Measures"
)
*
1
If you are starting from the suspend mode (
"Suspend / Hiber-
nation Functions"), if after three attempts the correct password is not in-
put, or if no password is entered for about a minute, the computer returns
to the suspend mode.
When an application or file that was previously displayed
appears on your screen,
the suspend or hibernation mode (
"Suspend / Hibernation Functions")
has been set.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start
*
1
(Power off)
Upon entering your User
Password and pressing
Enter
Slide the latch as shown and lift open the display.
Slide the power switch toward the rear of the computer and hold it for approximately
one second until the power indicator turns on before releasing it.
CAUTION
The computer will not power on when the LCD panel is closed.
Do not slide the power switch and hold it for more than four seconds.
Do not slide the power switch repeatedly.
After confirming that the power indicator has turned on, avoid the following
until Windows has completed loading.
• Touching the power switch.
• Performing any keyboard or trackball (or external mouse) operations.
• Closing the display.
If the display is closed while Windows is starting up, it is possible that color, etc.,
will not be displayed properly. Run the [MS-DOS Prompt] ([Start] - [Programs]
- [MS-DOS Prompt]), and use full screen display mode by pressing
Enter
. After returning from the full screen mode ( again),
the display will be shown correctly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
When the CPU temperature rises, the computer may not power on to prevent
the CPU from overheating. Should this happen, allow the computer to cool
down then switch the power on again.
If the computer still does not power on, please contact Panasonic Technical
Support.
2
1
Alt + Enter
Summary of Contents for Touchbook CF-45
Page 30: ...MEMO ...
Page 31: ......
