2
TK-CS10/TK-CS20
1 Warning
Caution:
• Pb free solder has a higher melting point than standard solder’s Typical the melting point is 50 - 70
°
F (30 - 40
°
C) higher. Please
use a soldering iron with temperature control and adjust it to 750±20
°
F (400±10
°
C). In case of using high temperature soldering
iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°
F/600
°
C).
• In the case that the lead wire snapped, Please change whole unit without repairing or re-connecting.
2 Specifications
Do not use with that is unsafe or of unknown quality without adequate disinfection.
Note:
* The reduction efficiency data in *2 are initial data based on a particular testing method. Actual filter performance may vary sig-
nificantly depending upon the quality of your tap water.
* The unit does not transform hard water into soft water.
Filtering capacity
TK-CS10 : 6.5 L/min (1.7 U.S. Gal/min)
TK-CS20 : 6.0 L/min (1.6 U.S. Gal/min)
[Initial data, At pressure of 100 kPa and temperature of 20
°
C]
Cartridge filter components
Powdered activated carbon, Non-woven fabric
Water pressure at which the unit can be used
40 kPa - 350 kPa
Working pressure
40 kPa - 750 kPa [Safety valve operating pressure: 350 kPa]
Filter performance
data
Residual chlorine *1
Reduction efficiency: 95 % *2, Filtration capacity: TK-CS10 : 12,500L, TK-CS20 : 12,800L
Turbidity *1
Reduction efficiency: 90 % *2, Filtration capacity: 12,500 L
Other removable matters
Red rust, Molds and Sediment
Helps remove
Coloring , Odor and Taste
Unremovable matters
Iron compounds and heavy metals (silver, copper and lead) dissolved in water, salt (sea salt), etc.
Mass {Weight}
1.1kg [2.6kg with water full]
Dimensions
Width 153 mm x Depth 260 mm x Height 265 mm
*1 This test method is based on Japanese Industrial Standard (JIS) S 3201-2004.