Tuning and Editing Channels
47
[Auto Tuning]
- Set all Digital TV channels automatically
1
Start Auto Tuning
2
Settings are made automatically
Digital TV Auto Tuning
All digital TV tuning data will be erased
CH 21
Searching
RF Ch
Channel Name
Type
Quality
Digital TV: 4
Radio: 0
Digital TV Auto Tuning
Scan
Digital TV
TV Finland
32
1
This will take about 3 minutes.
69
Digital TV
TV Finland
32
1
Digital TV
SVT HD
32
1
Automatically retune
all Digital TV channels
received in the area.
•
All the previous tuning settings are erased.
•
When the operation is completed, the channel at channel position [1] will be displayed.
•
Search begins in the order from the lower channels to the higher channels.
•
If tuning has not been done completely
[Manual Tuning] (see below)
[Manual Tuning]
- Set Digital TV channel manually
Normally use [Auto Tuning] or [Update Channel List] to update Digital TV channels on your channel
list. If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
[CH22]
10
10
No.
Channel Name
Type
New
Digital TV: 0
Radio: 0
0
0
Digital TV Manual Tuning
Physical Channel
Signal Quality
Signal Strength
474.00
MHz
select physical channel
start tuning
select offset
•
All channels found will be added to the Digital TV Channel List.
[Update Channel List]
- Update channels automatically
You can add new channels, delete duplicated channels, update channel name and position
automatically to Channel List.
69
CH21
Searching
RF Ch
Channel Name
Type
Quality
Digital TV Update Channel List
Scan
Digital TV: 0
Radio: 0
This will take about 3 minutes.
•
Channel List is updated while keeping your settings in
[Favourites Edit], [Channel List], [Child Lock], etc.
•
Depending on the signal condition, the update may not work
properly.
[Signal Condition]
- Check Digital TV signal
Selects a channel and checks the Digital TV signal condition.
•
To change the channel
CH
101 DZFinfokanal
0 2 4 6 8 10
Wenvoe
[CH32] 562.00 MHz
Digital TV Signal Condition
Signal Quality
Channel Name
Signal Strength
Network Name
RF Parameter
These bars show the maximum signal value of the
selected channel.
A good Signal Strength is not an indication of suitable signal for
Digital TV reception. Please use the Signal Quality indicator as
follows:
[Signal Quality]:
•
Green bar Good
•
Yellow bar Poor
•
Red bar Bad (Check the aerial)
Summary of Contents for TH-P42UT30Z Viera
Page 103: ...103 MEMO ...