manualshive.com logo in svg

Panasonic TH-98SQ2HW, Operating Instructions Manual

Share
Download
Panasonic TH-98SQ2HW Operating Instructions Manual Download Page 94

94

English

Note

● 

For [Power save], see page 67.

● 

When [Setup] - [Power management mode] is set 

to [On], [Ambient light sensor] is fixed to [Off] and 

cannot be set.

● 

When [Ambient light sensor] operates, [Power save] 

cannot be set. 

 

■

[Proximity sensor]

Sets the operation of the proximity sensor.

[Off]:

Disabled

[Content operation]:

Used for operating content for playback of the USB 

media player.

Proximity sensor operation during playback of the 

USB media player

Hold a hand, etc. near the sensor (10 cm or 

less):

Skips to the previous playback file.

Hold a hand, etc. away from the sensor 

(approx. 20 cm):

Skips to the next playback file.

[Power operation]:

 

Used for power ON/OFF operation.

Hold a hand, etc. for at least 3 seconds when 

the power is ON (10 cm or less):

Turns the power OFF (standby).

Hold a hand, etc. at least 3 seconds when the 

power is OFF (standby) (10 cm or less):

Turns the power ON.

Note

● 

For the USB media player, see page 127.

● 

When the [Schedule play function] is enabled, 

the proximity sensor operation (skip operation) is 

disabled.

● 

The distances are approximate and change 

depending on the color or shape of the hand, etc.

● 

Do not touch the front surface of the sensor by hand, 

etc.

 

■

[Colour sensor]

Sets the operation of the color sensor.

[Off]:

Disabled

[Colour temperature]:

Automatically adjusts the color temperature 

according to the viewing environment.

[White adjustment]:

Automatically adjusts the white balance (Hue) 

according to the viewing environment.

[Colour enhancement]:

Automatically adjust the color emphasis 

(Colour enhancement) according to the viewing 

environment.

[Colour temp/enhance]:

Automatically adjusts the color temperature/color 

emphasis (Colour enhancement) according to the 

viewing environment.

[White adj./Colour enh.]:

Automatically adjusts the white balance (Hue)/color 

emphasis (Colour enhancement) according to the 

viewing environment.

 

■

[Mode]

Sets the operation mode (sensitivity mode) of the 

color sensor according to the installation environment.

[Illumination]:

  Makes adjustment suited for room 

environments.

[Daylight]:

   Makes adjustment suited for bright 

environments.

Note

● 

For [Colour temperature], see page 51.

● 

For [Hue], see page 50.

● 

For [Colour enhancement], see page 52.

 

■

[Adjust white balance]

Adjusts the white balance of the display using the 

colour sensor.

Adjust white balance

Colour temperature

10700K

Start adjustment

Reset

[Colour temperature]:

Sets the target value for colour temperature.

[Start adjustment]:

Starts white balance adjustment.

[Reset]:

Resets the RGB gain value adjusted with the colour 

sensor to restore it to the RGB gain value as factory 

default.

Note

● 

The adjusted value is stored in [Picture] - [Colour 

temperature] - [User2].

● 

Operation is not available when [Picture] - [Picture 

mode] of the display to be adjusted is set to [DICOM].

● 

When setting the sensor module to the panel, do not 

push it too strong.

● 

When attaching the sensor module to the display 

again, use a spare double-sided tape, etc.

● 

Before adjustment, energize the unit for at least 1 

hour in picture signal displayed state.

Summary of Contents for TH-98SQ2HW
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands