manualshive.com logo in svg

Panasonic TH-98SQ2HW, Operating Instructions Manual

Share
Download
Panasonic TH-98SQ2HW Operating Instructions Manual Download Page 37

37

English

4

Press the <Main Power On / Off 

button> (

) on the unit to turn the 

power of the unit on.

● 

Power Indicator: Blue (Picture is displayed.)

● 

When the power of the unit is on, the power 

indicator lights up and remote control operation is 

possible.

● 

When the power indicator is lit, it is not necessary 

to press the <Main Power On / Off button> (

) 

on the unit. Operate the remote control so that the 

power indicator turns blue (picture is displayed).

 

■

To turn the power ON/OFF with the remote 

control

To turn the power on

● 

When the <Main power switch> is ON (  ) (Power 

Indicator - orange or purple), press <Standby (ON/

OFF) button> then the picture will be displayed.

● 

Power Indicator: Blue (Picture is displayed.)

To turn the power off

● 

When the <Main power switch> is ON (  ) (Power 

Indicator - blue), press <Standby (ON/OFF) button>, 

then the power will be turned off.

● 

Power Indicator: Orange or purple (standby)

Note

● 

During operation of the “Power management” function 

(see page 65), the power indicator turns purple in the 

power off state.

● 

After the power plug is disconnected, the power 

indicator may remain lit for a while. This is not a 

malfunction.

● 

The display turns off if the <Main power switch> is 

turned OFF (   ) or press the <Main Power On / Off 

button> (

) on the unit while the unit is ON (picture 

is displayed) or OFF (standby state).

● 

When [Power LED light-up setting] is set to [Off], 

the power indicator does not light up. (see page 98 

[Power LED light-up setting])

 

■

When the Unit is turned on for the first time

Following screen will be displayed.

1

Select the language with     and 

press <ENTER>.

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

Русский

OSD language

2

For vertical installation, select 

[Portrait] with     and press 

<ENTER>.

Display orientation

Landscape

Portrait

3

When setting [Quick start], select [On] 

with     and press <ENTER>.

Quick start

On
Off

This function quickly turns the power on at power-on.

Power consumption is increased in standby mode.

Note

● 

The [Quick start] setting cannot be used if the version 

of the main microcomputer of the main software is 

less than Version 2.4000.

● 

Placing the cursor on [On] on the [Quick start] setting 

screen displays the following message.
“Power consumption is increased in standby mode.”

● 

Once the items are set, the screens won’t be 

displayed when switching on the unit next time.  

Each item can be reset in the following menus.
[OSD language] (see page 72)
[Display orientation] (see page 97)
[Quick start] (see page 60)

4

Configure the network account setting 

as necessary.

Administrator account settings

Password policy

Save

Skip

Password

User name

dispadmin

Please set the user name and password. If not set, 

could not use the Web Control function and for communication  

control via a LAN (including Panasonic application software).

Summary of Contents for TH-98SQ2HW
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands