manualshive.com logo in svg

Panasonic TH-98SQ2HW, Operating Instructions Manual

Share
Download
Panasonic TH-98SQ2HW Operating Instructions Manual Download Page 165

165

English

Annotation

A marker is drawn by moving the mouse while left-clicking.
The drawn marker is erased after the time set on the menu has elapsed.

All erasure after the set time

1.

A marker is drawn by moving the mouse while left-

clicking in [Annotation] operation state.

2.

After drawing is complete, all drawing is erased 

after the set time has elapsed

Note

● 

Drawing is not possible while the app is starting up.

● 

The pen icon works as a color selection button for [Annotation] until timeout after drawing.

Multi-mouse support

Annotation is enabled with multiple mice. 

Note

● 

When mice more than the number of the USB terminals are connected, a USB hub is required.

● 

Up to 8 mice can be connected. However, simultaneous annotation is possible with one mouse only.

● 

When one mouse is performing annotation, other mice do not operate.

Summary of Contents for TH-98SQ2HW
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands