56
English
LightID
Changes the transmission setting for the LightID.
[External
control]:
Transmits a LightID signal set by the user.
In the following cases, the LightID set by
the user is erased.
•
When the setting for [LightID] is
switched to something other than
[External control]
•
When the unit is turned off
[Internal
ID]:
Transmits a built-in LightID signal of this unit.
If the user sets a LightID with [LightID]
set to [Internal ID], the LightID signal is
transmitted.
[Off]:
Disables the LightID function. LightID
signals are not transmitted.
The user can set a LightID with the following methods.
LightID signals transmitted from this unit can be
switched in conjunction with images.
Setting a LightID requires the purchase of the LightID.
•
The content list delivery function of the “Multi
Monitoring & Control Software” or the LightID control
function (see page 85)
•
“Content Management Software” (see page 85)
•
“USB media player” (see page 95)
Using the following methods, the built-in LightID of this
unit can be rewritten.
•
Control command execution menu of “Multi
Monitoring & Control Software” (see page 85)
•
USB memory device (see page 118)
Note
●
For purchasing LightID, see the following Panasonic
web site.
https://panasonic.net/cns/LinkRay/
●
If [LightID] is set to [Internal ID] at the time of
purchase, an ID to guide you to the Panasonic
homepage is sent.
●
In the following cases, the reception performance of
the LightID using devices (smartphone / tablet) may
be degraded.
•
When the LCD panel of this unit is exposed to an
external intense light, etc.
•
When the multi display setting is used with this
unit, or another LightID transmission device is
installed adjacently
•
When receiving far away from this unit, or receiving
at a location other than the front of this unit
•
When receiving from a dark image scene or black
parts outside the display range of the LCD panel
●
When sending the LightID, displayed images may
flicker due to the brightness change of the LightID
transmission. This is not a malfunction.
●
For handling devices (smartphone / tablet) receiving
the LightID, see the following Panasonic web site.
https://panasonic.net/cns/LinkRay/
●
The LightID function of this unit does not guarantee
all the operations of devices (smartphone / tablet).
Wobbling
Automatically shifts the display image to prevent image
retention on the liquid crystal panel.
Setting this to [On] moves the screen position at certain
intervals and displays the images.
Note
●
If [Multi display setting] is set to [On], this function
does not operate. (see page 57)
●
When this function is operating, part of the screen
may appear to be missing.
No activity power off
When this function is set to [Enable], the power is turned
off (standby) automatically when there is no operation of
the Display for 4 hours.
Starting from 3 minutes before the turn off, the
remaining time will be displayed.
No activity power off
Press any key to abort.
3 min
When the power is turned off due to this function, a
message [Last turn off due to ’No activity power off’.]
is displayed next time the power is turned on.
When the image set in [No signal image settings] (see
page 55) is displayed, remaining time is not displayed
even when the power is going to be turned off in 3
minutes. Instead, the image is displayed until the
power is turned off.
Note
●
While the screensaver is running, this function is
disabled.
OSD language
Select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
中文
: Chinese
日本語
: Japanese
Русский
: Russian
