manualshive.com logo in svg

Panasonic TH-70SF2HU, Operating Instructions (Functional Manual)

Share
Download
Panasonic TH-70SF2HU Operating Instructions (Functional Manual) Download Page 127

127

English

Symptoms

Check

The LightID cannot be received.

Check that [LightID] is not set to [Off]. (see page 56)
When [LightID] is not set to [External control]: Check that the LightID 

transmission is specified by “Multi Monitoring & Control Software”, “Content 

Management Software” or the function of the USB media player. (see page 

85)
Check that intense light is not hitting the LCD panel. (see page 12)
Reception may be difficult if the displayed image is dark. (see page 56)
Check that the devices (smartphone / tablet) are set properly. (see page 

13)

LCD Display panel

Symptoms

Check

The screen darkens slightly 

when bright pictures with minimal 

movements are shown.

The screen will darken slightly when photos, still images of a computer or 

other pictures with minimal movements are shown for an extended period. 

This is done to reduce image retention on the screen and the shortening of 

the screen’s service life: It is normal and not indicative of malfunctioning.

It takes a while for the picture to 

appear.

The unit digitally processes the various signals in order to reproduce 

esthetically pleasing images. As such, it sometimes takes a few moments 

for the picture to appear when the power has been turned on, when the 

input has been switched.

The edges of the images flicker.

Due to the characteristics of the system used to drive the liquid crystal 

panel, the edges may appear to flicker in the fast-moving parts of the 

images: This is normal and not indicative of malfunctioning.

There may be red spots, blue spots, 

green spots and black spots on the 

screen.

This is a characteristic of liquid crystal panels and is not a problem. The 

liquid crystal panel is built with very high precision technology giving you 

fine picture details. Occasionally, a few non-active pixels may appear on 

the screen as fixed points of red, blue, green, or black. Please note this 

does not affect the performance of your LCD.
Image retention may occur. If you display a still picture for an extended 

period, the image might remain on the screen. However, it will disappear 

when a general moving picture is displayed for a while. This is not 

considered as malfunction.

Image retention appears

This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, 

depending on the type of input signal. However, this is not a malfunction.

Summary of Contents for TH-70SF2HU




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands