53
Setup menu
3
Setup of Screensaver Time
After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become
available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)
Screensaver
Start
6:15
Start Time
12:30
Finish Time
Time 15:00
Function
Negative image
Mode
Time Designation
Screensaver
Start
12:00
Periodic Time
3:00
Operating Time
Time 15:00
Function
Negative image
Mode
Interval
Screensaver
Start
6:15
Screensaver duration
Time 15:00
Function
Negative image
Mode
Standby after SCR Saver
2
change
1
select
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
• “Screensaver duration” of the “Standby after SCR Saver” can be set from
0:00 to 23:59. When this is set to “0:00”, “ Standby after SCR Saver” will
not be activated.
Note:
Timer function will not work unless “Day/Time Setup” is set.
4
Start setting
Select “Start”.
Screensaver
On
Start
Mode
Time 15:00
Function
Negative image
2
set
1
select
The menu screen will disappear and the Screensaver will be activated.
To
stop the Screensaver under On, press the R button or any buttons on
the main unit.
Note:
When the display is turned off, the Scrensaver will be deactivated.
